################################################################################
#
# InstallShield Options File
#
# Wizard name: Install
# Wizard source: setup.jar
#
# This file can be used to configure Install with the options specified below
# when the wizard is run with the "-options" command line option. Read each
# setting's documentation for information on how to change its value.
# 
# A common use of an options file is to run the wizard in silent mode. This lets
# the options file author specify wizard settings without having to run the
# wizard in graphical or console mode. To use this options file for silent mode
# execution, use the following command line arguments when running the wizard:
# 
#    -options "D:\installImage\WAS\responsefile.base.txt" -silent
#
################################################################################

###################################################################################
#
# License Acceptance
#
# Valid Options	: true   Accepts the license. Will install the product.
#		  false  Declines the license. Install will not occur.  
#
# If no install occurs, this will be logged to a temporary log file in the user's temporary directory.
#
# By changing the silentInstallLicenseAcceptance.value in this response file to "true", you agree that you 
# have reviewed and agree to the terms of the IBM International Program License Agreement accompanying this 
# program, which is located at CD_ROOT\WAS\lafiles.  If you do not agree to these terms, do not change 
# the value or otherwise download, install, copy, access, or use the program and promptly return the 
# program and proof of entitlement to the party from whom you acquired it to obtain a refund of the amount you paid.
#
# 

-W silentInstallLicenseAcceptance.value="true"

################################################################################
#
# Install a new copy of IBM WebSphere Application Server product 
#
# If you are installing a new of copy of the product,  leave  the following line uncommented.
# Otherwise, comment the line.
#
-W detectedexistingcopypanelInstallWizardBean.choice="installNew"


################################################################################
#
# Apply maintenance and add features
#
# If you are planning to apply maintenance, add features, or both on 
# top of an existing installation, uncomment the following line. 
#
# -W detectedexistingcopypanelInstallWizardBean.choice="addFeaturesAndFixes"
#
# Please make sure installLocation is set to your existing install location.
#
#
# For additional features you wish to install, set the feature active
# properties to true.  
#
# NOTE: If the product edition of the custom installation package is 
#       different from the existing installation package, then the features
#       will not be added.
#
# For example, you have installed core product feature, now you want to install
# samples feature, the active properties should be:
#
# -P samplesProductFeatureBean.active="true"
# -P javadocsProductFeatureBean.active="false"
#


################################################################################
#
# IBM WebSphere Application Server, V6.0 Install Location
#
# The install location of the product. Specify a valid directory into which the
# product should be installed. If the directory contains spaces, enclose it in
# double-quotes as shown in the Windows example below. Note that spaces in the
# install location is only supported on Windows operating systems.
# 
# Below is the list of default install locations for each supported operating
# system.  By default, in this response file, the Windows install location is 
# used.  If you want to use the default install location for another operating
# system, uncomment the appropriate default install location entry (by removing '#') and 
# then comment out (by adding '#') the Windows operating system entry below.
#
# Comment this install location entry when doing an upgrade or upgrade will fail.
#
# AIX Default Install Location:
#
#    -P wasProductBean.installLocation=/usr/IBM/WebSphere/AppServer	
#
#
# HP-UX, Solaris or Linux Default Install Location:
#
#    -P wasProductBean.installLocation=/opt/IBM/WebSphere/AppServer	
#
#
# Windows Default Install Location:
#

#-P wasProductBean.installLocation="C:\Program Files\IBM\WebSphere\AppServer"

################################################################################
#
# Warning: the custom install package may update your existing profiles.
#
# This custom install package may update the runtime environment profiles
# in your runtime environment.  Tt is strongly recommended that you backup 
# all profiles before you continue.   If you uninstall this maintenance package
# at a later time, these profile updates will not be uninstalled because 
# additional custom modifications may have subsequently been made.  
# 
# For more information on profile management, see the wasprofile command
# documentation in the Information Center.
#
# The default value is "true", it will block the install unless you change
# the active property to "false".
#
# If you have already backed up your profiles or you wish to ingore the warnings,
# you can change it to "false".
#
# For example:
#

-W profileUpdateWarningPanelWizardBean.active="false"
# -W profileUpdateWarningPanelWizardBean.active="true"


################################################################################
#
# IBM WebSphere Application Server - Base, V6.0 UPGRADE from Base Trial or Express
#
# NOTE - : DO NOT Set this Option if you do not have any Base Trial or Express installed
#          You can not do an upgrade if you do not have at least one Base Trial or Express installed
#
#
# To setup an upgrade install, UNcomment the following entry ( do not change the "upgrade" value )
#
#-W detectedexistingcopypanelInstallWizardBean.choice="upgrade"
#
#
# Additionally, specify the installation location where the Base Trial or Express (which you want to upgrade)
# is installed, by UNcommenting the following entry and by replacing "BASE TRIAL OR EXPRESS INSTALL LOCATION" with the
# actual installation directory
#
#-P wsglobalinstallconstantsProductBean.detectedExistingPanelUpgradeMatchInstallLocation="BASE TRIAL OR EXPRESS INSTALL LOCATION"
#
#
#
# NOTE - : In an Upgrade the following entries will be skipped and only an upgrade of the specified Base Trial or Express
#          to Base will occur
#


################################################################################
#
# Setup type
#
# This value is required for the installation. Do not change this!
# 

-W setuptypepanelInstallWizardBean.selectedSetupTypeId="Custom"


################################################################################
#
# "Core Product Files" feature
#
# This feature is required by Application Server and will be installed by default. 
# Selection is not required.
#


################################################################################
#
# "Application Server samples" feature
#
# The selection state of the "Application Server samples" feature. Legal values
# are:
# 
#    true  - Indicates that the feature is selected for installation
#    false - Indicates that the feature is not selected for installation
# 
# For example, to select "Application Server samples" for installation, use
# 
#    -P samplesProductFeatureBean.active="true"
#
# 


-P samplesProductFeatureBean.active="false"


################################################################################
#
# "Javadocs" feature
#
# The selection state of the "Javadocs" feature. Legal values are:
# 
#    true  - Indicates that the feature is selected for installation
#    false - Indicates that the feature is not selected for installation
# 
# For example, to select "Javadocs" for installation, use
# 
#    -P javadocsProductFeatureBean.active="true"
#


-P javadocsProductFeatureBean.active="true"



################################################################################
# 
# Port value assignment
# 
# The following entries are used to reset port numbers used in the configuration
#
# They are currently set to the defaults. 
# Please check to make sure there are no Port Conflicts
#
-W defaultprofileportspanelInstallWizardBean.WC_defaulthost="9080"
-W defaultprofileportspanelInstallWizardBean.WC_adminhost="9060"
-W defaultprofileportspanelInstallWizardBean.WC_defaulthost_secure="9443"
-W defaultprofileportspanelInstallWizardBean.WC_adminhost_secure="9043"
-W defaultprofileportspanelInstallWizardBean.BOOTSTRAP_ADDRESS="2809"
-W defaultprofileportspanelInstallWizardBean.SOAP_CONNECTOR_ADDRESS="8880"
-W defaultprofileportspanelInstallWizardBean.SAS_SSL_SERVERAUTH_LISTENER_ADDRESS="9401"
-W defaultprofileportspanelInstallWizardBean.CSIV2_SSL_SERVERAUTH_LISTENER_ADDRESS="9403"
-W defaultprofileportspanelInstallWizardBean.CSIV2_SSL_MUTUALAUTH_LISTENER_ADDRESS="9402"
-W defaultprofileportspanelInstallWizardBean.ORB_LISTENER_ADDRESS="9100"
-W defaultprofileportspanelInstallWizardBean.DCS_UNICAST_ADDRESS="9353"
-W defaultprofileportspanelInstallWizardBean.SIB_ENDPOINT_ADDRESS="7276"
-W defaultprofileportspanelInstallWizardBean.SIB_ENDPOINT_SECURE_ADDRESS="7286"
-W defaultprofileportspanelInstallWizardBean.SIB_MQ_ENDPOINT_ADDRESS="5558"
-W defaultprofileportspanelInstallWizardBean.SIB_MQ_ENDPOINT_SECURE_ADDRESS="5578"




################################################################################
# 
# Node name
#
# Please select the node name for the Application Server. Node name under one cell 
# has to be unique. 
#
# Replace YOUR_NODE_NAME with the actual node name.
#
#-W nodehostandcellnamepanelInstallWizardBean.nodeName="YOUR_NODE_NAME"

################################################################################
#
# Host name
#
# Specify the host name for the Application Server. The host name is the domain 
# name system (DNS) name (short or long) or the IP address of this computer. 
# 
# Replace YOUR_HOST_NAME with the actual host name. Comment the line to use 
# the default value.
#
#-W nodehostandcellnamepanelInstallWizardBean.hostName="YOUR_HOST_NAME"

################################################################################
#
# Cell name
#
# You should not Modify this, unless absolutely necessary.
# 
# The Wizard would set this to short local host name + "Node##Cell" by default.
#
# If you would like to override the resolved cell name value, uncomment the line and
# replace YOUR_CELL_NAME with <YOUR_OWN_VALUE>.
#
# -W setcellnameinglobalconstantsInstallWizardBean.value="YOUR_CELL_NAME"





################################################################################
#
# Run WebSphere Application Server as a Windows service
# (Windows ONLY)
# 
# The selection state of the service installation. Legal values are:
#
#    true  - Indicates that you choose to install the service
#    false - Indicates that you not choose to install the service
#


-W winservicepanelInstallWizardBean.winServiceQuery="false"

# Specify account type of the service. Legal values are:
#   
#    localsystem   - Indicates that you choose to use Local System account.
#    specifieduser - Indicates that you choose to use specified user account.
#



-W winservicepanelInstallWizardBean.accountType="localsystem"


# Specify startup type of the service. Legal values are:
#
#    automatic - Indicates that you choose to use automatic startup type
#    manual    - Indicates that you choose to use manual startup type
#    disabled  - Indicates that you choose to use disabled startup type
#


-W winservicepanelInstallWizardBean.startupType="manual"
 

# Specify your user name and password. Your user name
# must belong to the administrator group to be authorized
# to install a Windows service. Your user name must have
# the "Log On as a Service" user right for the service to run properly.
#
# Replace YOUR_USER_NAME with your username.
# Replace YOUR_PASSWORD with your valid password.
 

#-W winservicepanelInstallWizardBean.userName="YOUR_USER_NAME"
#-W winservicepanelInstallWizardBean.password="YOUR_PASSWORD"
 

################################################################################
#
# WebSphere Application Server Profile Creation Tool (PCT)
#
# To launch the Profile Creation Tool SILENTLY at the end
# of the installation, please change the value to "true".
# Otherwise, change the value to "".
#
# Please Note: This will launch the latest PCT.  If the Custom Install Package
# contains profile customizations, this will launch the PCT installed in
# <WAS_HOME>/cip/<uid>/ProfileCreator.  Otherwise, it will launch the GM version
# PCT which can be found at <WAS_HOME>/bin/ProfileCreator.
# 

-W BEsummarypanelInstallWizardBean.launchPCT=""

################################################################################
# If you choose to run Profile Creation Tool silently at the end of the
# installation, you must
# 1. get a copy of the PCT response file of Profile creator (from CD) and put to a temp dir
#    such as: /tmp/WAS/responsefile.pct.BaseProfile.txt
# 2. modify the response file by filling in the required options/values. 
# Note: If the values are not completed properly, the configuration may be unsuccessful. 
# 3. specify below the absolute path to your modified response file. 
# 
# For example, -W pctresponsefilelocationqueryactionInstallWizardBean.fileLocation="/tmp/WAS/responsefile.pct.BaseProfile.txt"


#-W pctresponsefilelocationqueryactionInstallWizardBean.fileLocation=""

################################################################################

