Creating a virtual port with Microsoft Windows Server 2012 Virtual HBA

Before configuring the Hyper-V guest OS, it is necessary to configure the Microsoft Windows Server 2012 virtual HBA.

Before you begin

The following requirements are necessary to configure Microsoft Windows Server 2012 Virtual HBA with Hyper-V:
  • NPIV-enabled FC adapter
  • NPIV-enabled FC Switch
  • Microsoft Windows Server 2012
  • NPIV WMI provider that is installed on the host. (Most of the FC drivers implement this provider.)

Procedure

  1. Click Virtual SAN Manager in the right panel of the Windows Server 2012 Hyper-V Manager.
  2. Create a virtual SAN and select the HBA to be virtualized.
  3. In the Hyper-V guest OS settings, add a Fibre Channel adapter. Specify the virtual SAN created in 2.
  4. In the Open Switch Administration panel, double-check the WWPN of the virtual HBA from the name server. Typically, it should share a port with the physical HBA.
  5. Modify the zone configuration to make the virtual HBA visible to the storage port.