2145 UPS-1U connectors and switches
The 2145 UPS-1U has external connectors and dip switches.
Locations for the 2145 UPS-1U connectors and switches
Figure 1 shows the location of the connectors and switches on the 2145 UPS-1U.
Figure 1. 2145
UPS-1U connectors
and switches
- 1 Main power connector
- 2 Communication port
- 3 Dip switches
- 4 Load segment 1 receptacles
- 5 Load segment 2 receptacles
2145 UPS-1U dip switches
Figure 2 shows
the dip switches, which can be used to configure the input and output
voltage ranges. Because this function is performed by the IBM Spectrum Virtualize™ software,
both switches must be left in the OFF position.
Figure 2. 2145
UPS-1U dip
switches
2145 UPS-1U ports not used
The 2145
UPS-1U is
equipped with ports that are not used by the IBM Spectrum Virtualize and
have not been tested. Use of these ports, in conjunction with the IBM Spectrum Virtualize or
any other application that might be used with the IBM Spectrum Virtualize,
is not supported. Figure 3 shows
the 2145
UPS-1U ports
that are not used.
Figure 3. Ports not used by
the 2145
UPS-1U
- 1 USB interface port
- 2 Network ports
- 3 Load segment receptacles
2145 UPS-1U power connector
Figure 4 shows the power connector for the 2145 UPS-1U.
Figure 4. Power connector