Requirements for completing the cable connection table
The cable connection table helps you connect the units in the rack.
- Download the cable connection table:
- Go to the following website: www.ibm.com/support.
- Under Support shortcuts, click Plan and install documentation.
- In the search box, type and search for IBM System Storage IBM Spectrum Virtualize Planning Information; then, click the search result.
- Click the appropriate link to download it to your computer.
The following terms and descriptions assist you in completing
the cable connection table for the
IBM Spectrum Virtualize™
nodes:
| Component | Requirements |
|---|---|
| IBM Spectrum Virtualize node | A IBM Spectrum Virtualize node requires one or more power connections, depending on the server model type. |
| Uninterruptible power supply | Protect each node with an uninterruptible power supply (UPS). A UPS is connected directly to a rack power distribution unit. |
| Ethernet | The Ethernet hub or switch to which the IBM Spectrum Virtualize node is connected. Ethernet connections are required to access the management GUI through one of the nodes in the clustered system. Point a supported web browser to one of the management IP addresses to connect from any workstation that is able to reach the system in your Ethernet environment. Each node requires connections to the host systems. These connections can be Fibre Channel connections or iSCSI connections through the two 1 Gbps Ethernet ports on the node. If the 10 Gbps Ethernet feature is installed, you can connect to the host systems through the 10 Gbps Ethernet ports on the node. |
| Fibre Channel | The Fibre Channel switch ports to which the Fibre Channel ports of the IBM Spectrum Virtualize node are connected. |