Configuration data table guidelines
It is recommended that you complete the configuration data table before the IBM Spectrum Virtualize™ nodes are installed.
You can download the configuration data table from the following website:
Include the following initial settings for the clustered system:
| Term | Description |
|---|---|
| Language | The national language in which you want the messages that are displayed on the CLI. The default setting is English. |
| Port 1 | |
| Management IPv4 address | IPv4 address that is used for typical configuration and service access to the system |
| Service IPv4 address | IPv4 address that is used for service access to a node from the system |
| Gateway IPv4 address | IPv4 address for the default local gateway for the system |
| IPv4 subnet mask | IPv4 subnet mask, which identifies the IPv4 network the system is operating on |
| Management IPv6 address | IPv6 address that is used for typical configuration and service access to the system |
| Service IPv6 address | IPv6 address that is used for service access to a node from the system |
| Gateway IPv6 address | IPv6 address for the default local gateway for the system |
| IPv6 prefix | The system prefix, which identifies the IPv6 network the system is operating on |