Technician port for node access

A technician port is available on the server to use a direct connection for installing and servicing support.

Information on how to determine which port to use as the technician port can be found in Technician port.

The technician port provides direct access to the service assistant GUI and command line interface (CLI).

The technician port can be used by directly connecting a computer that has web browsing software and is configured for Dynamic Host Configuration Protocol (DHCP) through a standard 1 Gbps Ethernet cable.

If the node has candidate status when you open the web browser, the initialization tool is displayed. Otherwise, the service assistant interface is displayed.

Important: Do not use the initialization tool on a node if any other node in the system is already active. For example, a node status LED is solid on any node of the system.

To access the service assistant through the technician port when the node status is candidate, select the wrench (spanner) icon on the installation page or change the web page address from http:\\install to the following address:

https:\\service\service\node\home.action

See the following information for how to access the CLI through the technician port. For other ways to access the CLI, see User interfaces for servicing your system.

To use the technician port, you must be next to the node. The technician port does not work if it is connected to an Ethernet switch.

If you have Secure Shell (SSH) software on the computer that is directly connected to the technician port, then you can use it to access the CLI as superuser at 192.168.0.1. The default superuser password is passw0rd.

Note: When your personal computer is configured with DHCP, the technician port uses DHCP to reconfigure network services on your personal computer. Software on your personal computer that was using these services might experience network problems while it is connected to the technician port. For example, selecting a link in a web page that was loaded before you connect to the technician port might result in an error message.