Error codes
This section details error messages for the IBM® Storage Support for Microsoft VSS and VDS software.
Note: For additional
help, see:
|
| Error Code | Description |
|---|---|
| -1 | Other errors for restore. |
| 5 | The CIMOM password or user name is incorrect. |
| 100 | VerifyMTFC: All the FCMAPs?copy rate is 0 in the dependency list of Target Volume |
| 102 | findTarget: An exception occurred while getting VSS_FREE volumes. |
| 103 | findTarget: The number of source and target volumes are not equal. |
| 200 | assignVol: Invalid controller WWPN. |
| 201 | assignVol: Invalid volume serial number; or Internal Error. Unable to determine target storage. |
| 202 | assignVol: Invalid assignment/unassignment operation, needs to be 1 or 2; or Internal Error: Unable to obtain Storage Configuration Service. |
| 205 | ERROR: The local host has defined WWPN/IQN that the configuration does not support. |
| 300 | The operation was successfully completed. And Newer plus current cascading snapshots are deleted. |
| 308 | Please specify to list 'all|free|reserved|assigned|unassigned|infc'. |
| 400 | executeFlashCopy: Input Vector was null. |
| 401 | executeFlashCopy: AttachReplicas returned null. |
| 402 | AttachReplicas returned error. |
| 500 | withdrawFlashCopy: Input volume was null. |
| 501 | withdrawFlashCopy: Volumes are not in a storage synchronized relationship; or Invalid parameters. |
| 502 | withdrawFlashCopy: ModifySynchronization returned null |
| 503 | withdrawFlashCopy: Input volume was invalid. |
| 504 | withdrawFlashCopy: Storage Configuration Service was null! |
| 512 | Error: Volume is offline. |
| 600 | cleanup: Source volumes were null. |
| 700 | ERROR: Null value found either WWPN, boolean variable, or targetSVC. |
| 701 | ERROR: The length of WWPN does not match with boolean variable. |
| 702 | ERROR: The targetSVC's ID does not match. |
| 711 | No matching synchronization was found. |
| 712 | Internal Error: Unable to obtain Storage Configuration Service. |
| 713 | The SAN Volume Controller does NOT support restoring FlashCopy. |
| 714 | The SAN Volume Controller does not support restoring FlashCopy with SEV. |
| 715 | Cannot restore the FlashCopy because target volume is already a copying state FCMAP's target. |
| 716 | Reuse existing FCMAP to perform restore failed. |
| 718 | Provider does not support restoring FlashCopy for SAN Volume Controller 5.1 or higher. |
| 719 | Provider does not support restoring FlashCopy with cascading on SAN Volume Controller 5.1 or higher. |
| 720 | Prepare FlashCopy to restore failed. |
| 730 | Execute restore FlashCopy failed. |
| 740 | Wait related FCMAP to finish failed. |
| 800 | There is FCMAP with copy rate 0 and others copy rate greater than 0 in the dependency list of Target Volume. |
| 911 | Internal Error: The CIMOM may not be functioning correctly. |
| 1000 | JVM Creation failed. ERR_JVM |
| 1001 | Class not found: %1. ERR_CLASS_NOT_FOUND |
| 1002 | Some required parameters are missing. ERR_MISSING_PARAMS |
| 1003 | Method not found: %1. ERR_METHOD_NOT_FOUND |
| 1004 | A missing parameter is required. Use the configuration utility to set this parameter: %1. ERR_REQUIRED_PARAM |
| 1006 | The following method failed: %1. ERR_METHOD |
| 1007 | Provider initialization failed. Refer to the logs for the error messages. ERR_GLOBALINIT |
| 1600 | The recovery file could not be created. ERR_RECOVERY_FILE_CREATION_FAILED |
| 1700 | ibmGetLunInfo failed in AreLunsSupported. ERR_ARELUNSSUPPORTED_IBMGETLUNINFO |
| 1800 | ibmGetLunInfo failed in FillLunInfo. ERR_FILLLUNINFO_IBMGETLUNINFO |
| 1900 | Failed to delete the following temp files: %1 ERR_GET_TGT_CLEANUP |
| 2500 | Error initializing log. ERR_LOG_SETUP |
| 2501 | Unable to search for incomplete Shadow Copies. Windows Error: %1. ERR_CLEANUP_LOCATE |
| 2502 | Unable to read incomplete Shadow Copy Set information from file: %1. ERR_CLEANUP_READ |
| 2503 | Unable to clean up snapshot stored in file: %1. ERR_CLEANUP_SNAPSHOT |
| 2504 | Cleanup call failed with error: %1. ERR_CLEANUP_FAILED |
| 2505 | Unable to open file: %1. ERR_CLEANUP_OPEN |
| 2506 | Unable to create file: %1. ERR_CLEANUP_CREATE |
| 2507 | HBA: Error loading hba library: %1. ERR_HBAAPI_LOAD |
| 3000 | An exception occurred. Check the ESSService log. ERR_ESSSERVICE_EXCEPTION |
| 3001 | Unable to initialize logging. ERR_ESSSERVICE_LOGGING |
| 3002 | Unable to connect to the CIM agent. Check your configuration. ERR_ESSSERVICE_CONNECT |
| 3003 | Unable to get the Storage Configuration Service. Check your configuration. ERR_ESSSERVICE_SCS |
| 3004 | An internal error occurred with the following information: %1. ERR_ESSSERVICE_INTERNAL |
| 3005 | Unable to find the VSS_FREE controller. ERR_ESSSERVICE_FREE_CONTROLLER |
| 3006 | Unable to find the VSS_RESERVED controller. Check your configuration. ERR_ESSSERVICE_RESERVED_CONTROLLER |
| 3007 | Unable to find suitable targets for all volumes. ERR_ESSSERVICE_INSUFFICIENT_TARGETS |
| 3008 | The assign operation failed. Check the CIM agent log for details. ERR_ESSSERVICE_ASSIGN_FAILED |
| 3009 | The withdraw FlashCopy operation failed. Check the CIM agent log for details. ERR_ESSSERVICE_WITHDRAW_FAILED |
| 4000 | Failed to initialize the %1. ERR_INIT |
| 4001 | Internal Error: %1. ERR_INTERNAL |
| 4002 | %1. INFO_GENERAL |
| 4096 | executeFlashCopy() - Job started |
| 32816 | Volume(s) are already in a FlashCopy relationship. ERR_FLASHCOPY_ALREADY_IN_PROGRESS |
| 37883 | Volume already assigned. |
| 38163 | Volume already unassigned. |