Checking the status of the node by using the CLI

You can use the command-line interface (CLI) to check the status of the node.

Procedure

Run one of the following commands to check the detailed status of one node:

lsnode 1
lsnode node1

Results

The following output shows what is displayed after you run the command.

Example

id 1
name node1
UPS_serial_number
WWNN 5005076071000010
status online
IO_group_id 0
IO_group_name io_grp0
partner_node_id 2
partner_node_name node2
config_node yes
UPS_unique_id
port_id 5005076071010010
port_status active
port_speed 4Gb
port_id 5005076071020010
port_status active
port_speed 4Gb
port_id 5005076071030010
port_status active
port_speed 4Gb
port_id 5005076071040010
port_status active
port_speed 4Gb
hardware S01
iscsi_name iqn.1986-03.com.ibm:2145.bm-cluster-curie.node1
iscsi_alias
failover_active no
failover_name node2
failover_iscsi_name iqn.1986-03.com.ibm:2145.bm-cluster-curie.node2
failover_iscsi_alias
panel_name J308E4K
enclosure_id
canister_id
enclosure_serial_number
service_IP_address
service_gateway
service_subnet_mask
service_IP_address_6
service_gateway_6
service_prefix_6
service_IP_mode static
service_IP_mode_6
site_id
site_name
identify_LED


product_mtm 0001-S01

code_level 7.7.1.0 (build 130.12.1607281650001)
serial_number J308E4K
machine_signature F10C-2E38-5673-6756