Removing system information for nodes with error code 550 or error code 578 using the service assistant

The system recovery procedure works only when all nodes in the system of nodes to be recovered are in candidate status. If there are any nodes that display error code 550 or error code 578, you must remove their system data.

About this task

Before performing this task, ensure that you have read the introductory information in the overall recover system procedure.

Having used the service assistant to identify the system status and specific error, you will continue to use the service assistant to complete this procedure.

Selecting Change Node in the service assistant tool lists all of the Spectrum Virtualize nodes that have logged in to the node that is running the tool. Follow these guidelines when performing the recovery procedure:
  • The system column of the node table identifies any nodes that are not in the system of nodes that must be recovered. Do not remove the system data for these nodes.
  • Do not remove system information from any node that has online status, unless directed to do so by remote technical support.
  • Do not remove the system data from the first node until you ensure that the following conditions are met:
    • All nodes in the system of nodes are listed in the Change Node part of the service assistant and are in service status with error 550 or 578
    • You have checked the extra node error data for each node to ensure that no other communication or hardware problem is causing the node error.

Procedure

  1. In the change node part of the service assistant tool, select the radio button of the node with status service and error 550 or 578.
  2. Select Manage System.
  3. Click Remove System Data.
  4. Confirm that you want to remove the system data when prompted.
  5. Remove the system data for the other nodes that display a 550 or a 578 error.

    All nodes previously in this system must have a node status of Candidate and have no errors listed against them.

  6. Resolve any hardware errors until the error condition for all nodes in the system is None.
  7. Ensure that all nodes in the system of nodes to be recovered display a status of candidate.

Results

When all nodes display a status of candidate and all error conditions are None, you can run the system recovery procedure.