Replaceable units: 5U expansion enclosure
On 5U expansion enclosures, all replaceable parts are customer-replaceable units (CRUs).
Expansion enclosure drives
Table 1 summarizes the types of SAS drives that are supported by the 5U expansion enclosure.
| FRU part number | Description |
|---|---|
| 01LJ061 | 600 GB 15 K disk drive |
| 01LJ062 | 1.2 TB 10 K disk drive |
| 01LJ063 | 1.8 TB 10 K disk drive |
| 01LJ064 | 6 TB 7.2 K Near-Line SAS disk drive |
| 01LJ065 | 8 TB 7.2 K Near-Line SAS disk drive |
| 01LJ066 | 10 TB 7.2 K Near-Line SAS disk drive |
| 01LJ067 | 1.6 TB 2.5-inch flash drive |
| 01LJ068 | 3.2 TB 2.5-inch flash drive |
| 01LJ069 | 1.92 TB tier 1 flash drive |
| 01LJ070 | 3.84 TB tier 1 flash drive |
| 01LJ071 | 7.68 TB tier 1 flash drive |
| 01LJ072 | 15.36 TB tier 1 flash drive |
| 01LJ179 | 12 TB 7.2 K Near-Line SAS disk drive |
Other expansion enclosure parts
Table 2 summarizes the part numbers and feature codes for other parts. The values are the same for all systems that support the 5U expansion enclosure.
| FRU Part Number | Description | Comments |
|---|---|---|
| 00AR317 | 3 m 12 Gb SAS Cable (mSAS HD) | |
| 00AR439 | 6 m 12 Gb SAS Cable (mSAS HD) | |
| 01LJ114 | Rail kit | |
| 01LJ116 | Front fascia (4U front cover) | |
| 01LJ118 | Display panel assembly | |
| 01LJ120 | PSU fascia (1U cover) | The fascia must be removed to access the power supply units. |
| 01LJ122 | Power® supply unit (PSU) | The expansion enclosure contains 2 PSUs. Each PSU requires a C19/C20 power cord. |
| 01LJ124 (for use with enclosure FRU P/N 01LJ112) 01LJ860 (for use with enclosure FRU P/N 01LJ607 |
Secondary expansion module | The expansion enclosure supports two-secondary expansion modules. CAUTION: Use caution when you are removing or replacing a secondary expansion module from an
enclosure with FRU part number 01LJ112. Avoid contact with the connectors on the main
board.
|
| 01LJ126 | Fan module | The expansion enclosure contains four fan modules. |
| 01LJ128 | Expansion canister | |
| 01LJ130 | Cable management arms (CMA) | The part contains the upper and lower CMA. |
| 01LJ132 | Top cover | |
| 01LJ134 | Fan interface board | |
| 01LJ607 | Enclosure Note: Replaces enclosure FRU P/N 01LJ112.
|
Includes the drive board, signal interconnect board, and internal power cables, in an otherwise empty enclosure. |
| 39M5388 | 16A power cord C19/C20 2 m |