lsenclosureslot
Use the lsenclosureslot command to view information about each drive slot in the enclosure.
Syntax
Parameters
- -filtervalue attribute=value
- (Optional) Specifies a list of one or more filters. Only objects
with a value that matches the filter attribute value are displayed.
Note: Some filters allow the use of a wildcard when you enter the command. The following rules apply to the use of wildcards:
- The wildcard character is the asterisk (*).
- The command can contain a maximum of one wildcard.
- When you use a wildcard, enclose the filter entry within
double quotation marks (""):
lsenclosureslot -filtervalue "enclosure_id>2"
- -filtervalue?
- (Optional) Displays the valid filter attributes for the
-filtervalue parameter:
- drive_id
- drive_present
- enclosure_id
- port_1_status
- port_2_status
- slot_id
- -delim delimiter
- (Optional) By default in a concise view, all columns of data are
space-separated. The width of each column is set to the maximum
width of each item of data. In a detailed view, each item of data
has its own row, and if the headers are displayed, the data is
separated from the header by a space. The
-delim parameter overrides this behavior.
Valid input for the -delim parameter is a
1-byte character. If you enter
-delim :on the command line, the colon character (:) separates all items of data in a concise view; for example, the spacing of columns does not occur. In a detailed view, the data is separated from its header by the specified delimiter. - -nohdr
- (Optional) By default, headings are displayed for each column of data in a concise style view, and for each item of data in a detailed style view. This parameter suppresses the display of these headings.
- -slotslot_id
- (Optional) Specifies the slot to display information for (it
provides a detailed view for that enclosure slot). This parameter is
valid only when an enclosure is specified. The value must be a
number in the range 1 - 92.Note:
If slot information is requested for a slot that does not exist on the specified enclosure, value that is displayed is blank.
- enclosure_id
- (Optional) Lists slots for that enclosure. Must be specified whether -slot is used.
Description
This command displays information about each drive slot in the enclosure, such as whether a drive is present, and the port status for that drive. This table shows the possible outputs:| Attribute | Description |
|---|---|
| enclosure_id | The identity of the enclosure that contains the drive slot. |
| slot_id | Identifies which of the drive slots in the enclosure it is. |
| port_1_status | The status of enclosure slot port
1. If the port is bypassed for multiple
reasons, only one is shown. In order of priority, they are:
|
| port_2_status | The status of enclosure slot port
2. If the port is bypassed for multiple
reasons, only one is shown. In order of priority, they are:
|
| fault_LED | The state of the combined fault and identify
light-emitting diodes (LEDs):
|
| powered | Indicates whether the slot is powered on.
The values are yes or
no. |
| drive_present | Indicates if a drive is in the slot. The
drive can be working, dead, or powered off. The values are
yes (present) or no
(empty). |
| drive_id | Indicates the ID of the drive in the slot; blank if there is no drive present, or if there is a drive present but it is offline and unmanaged. |
| error_sequence_number | Indicates the error log number of the highest priority error for this object. This value is typically blank. However, if there is a problem (for example, the status is degraded), then it contains the sequence number of that error. |
| row | Identifies the row in which the slot appears. The value
must be a letter in the range A -
G. |
| column | Identifies the column in which the slot appears. The value
must be a number in the range 1 -
14. |
A concise invocation example
This example displays information about mappings between the
1 and 2 dimensional IDs
lsenclosureslotThe resulting output:
enclosure_id slot_id port_1_status port_2_status drive_present drive_id row column
1 1 online online no A 1
1 2 online online no A 2
1 3 online online no A 3
1 4 online online no A 4
1 5 online online no A 5
...
1 87 online online no G 9
1 88 online online no G 10
1 89 online online no G 11
1 90 online online no G 12
1 91 online online no G 13
1 92 online online no G 14A detailed invocation
example showing slot 2 in enclosure
5
lsenclosureslot -delim : -slot 2 5
The resulting output:
enclosure_id:5
slot_id:2
port_1_status:online
port_2_status:online
fault_LED:off
powered:yes
drive_present:yes
drive_id:105
error_sequence_number:
interface_speed:6GbA detailed invocation example
lsenclosureslot -delim :The resulting output:
enclosure_id:slot_id:port_1_status:port_2_status:drive_present:drive_id:error_sequence_number
1:1:online:online:yes:22:
1:2:online:online:yes:23:
1:3:online:online:yes:19:
1:4:online:online:yes:7:
1:5:online:online:yes:10:
1:6:online:online:yes:18:
1:7:online:online:yes:20:
1:8:online:online:yes:16:
1:9:online:online:yes:12:
1:10:online:online:yes:11:
1:11:online:online:yes:21:
1:12:online:online:yes:9:
1:13:online:online:yes:14:
1:14:online:online:yes:5:
1:15:online:online:yes:15:
1:16:online:online:yes:13:
1:17:online:online:yes:6:
1:18:online:online:yes:17:
1:19:online:online:yes:4:
1:20:online:online:yes:1:
1:21:online:online:yes:8:
1:22:online:online:yes:0:
1:23:online:online:yes:3:
1:24:online:online:yes:2: