Planning for a direct-attached configuration

A direct-attached configuration dedicates entire port bandwidth to be used for a specific connection. Planning must account for the volume of expected traffic before you decide how many ports are used in a direct-attached configuration.

The system offers multiple options in deciding how to create a direct-attached configuration. Bandwidth requirements for a direct-attached configuration make it important to determine the volume of expected traffic in deciding the number of ports.

The following guidelines are provided for direct-attached configurations.
Note: One or more Fibre Channel host adapters must be installed for the system to support these direct attachment configurations.
  1. Fibre Channel direct attachment to host systems.

    The system allows direct attachment connectivity between its Fibre Channel ports and host ports. Host systems can be connected to 16 Gb Fibre Channel ports on the system. No special configuration is needed for host systems that are using this configuration.

  2. Fibre Channel direct attachment between nodes in a system.

    Direct connection of the system Fibre Channel ports without using a Fibre Channel switch is supported. Such direct connections between the system nodes might be useful in small configurations where no Fibre Channel switch exists. Ensure that sufficient bandwidth is provisioned between nodes to accommodate all the intra-node traffic.

Node to host and node to node direct attachment is supported on all 16 Gb Fibre Channel ports.