lsservicestatus

Use the lsservicestatus command to display the status of a node.

Syntax

Read syntax diagramSkip visual syntax diagram sainfo lsservicestatus panel_name

Parameters

panel_name
(Optional) If a panel_name is not provided, the service recommendation for the local node is returned. If a panel_name from the list that is returned by lsservicenodes is specified, then the service recommendation for that node is returned. The command fails if the panel_name ID is not in the list that is returned by lsservicenodes. This output is returned as the node status on all Universal Serial Bus (USB) flash drive commands.
Note: For 2076 nodes, the panel name is the value of the enclosure ID and canister ID or the enclosure serial number and canister location.

Description

Use this command to display the status of a node. This command provides all the information that can be obtained by using the front panel of a system node.

You can run this command on any node (even one that is not part of a system) to obtain the vital product data (VPD) and error status.

This table shows the possible outputs.
Note: On a node that is not part of a system, some of the fields are blank or N/A.
Table 1. lsservicestatus output
Attribute Value
panel_name Indicates the front panel name, enclosure IDs, or canister IDs that identify the node.
console_ip Indicates an Internet Protocol (IP) Version 4 or 6 address.
Note: This field might be blank if the node is not present in a system.
has_nas_key Indicates the has_nas_key field value. The values are yes or no.
Note: This field might be blank if the node is not present in a system.
fc_io_ports Indicates the number of configured Fibre Channel (FC) input/output (I/O) ports on the node. The value is a number. This field is repeated for each management address.
fc_io_port_id Indicates the ID of the FC I/O port. The value is a number. This field is repeated for each management address.
fc_io_port_WWPN Indicates the Worldwide port name (WWPN) of the FC I/O port. The value is 16 hexadecimal characters (lowercase). This field is repeated for each management address.
fc_io_port_switch_WWPN Indicates the WWPN of the fabric port name. The value is 16 hexadecimal characters (lowercase) or all zeros if never active. This field is repeated for each management address.
fc_io_port_state Indicates whether the port is working - active or inactive. This field is repeated for each management address.
fc_io_port_FCF_MAC Indicates the FCF MAC address for active Ethernet. The value is blank for inactive or broken Ethernet, or N/A for FC type. This field is repeated for each management address.
fc_io_port_vlanid Indicates the virtual local area network (VLAN) ID being used. The value is three hexadecimal digits for previously active or inactive Ethernet, blank for Ethernet that is never active, or N/A for FC type. This field is repeated for each management address.
fc_io_port_type Indicates the type of the platform port for the FC I/O port. This field is repeated for each management address.
fc_io_port_type_port_id Indicates the platform port type index of the platform port supplies the FC I/O port. Use both fc_io_port_type_port_id and fc_io_port_type to find the platform port. This field is repeated for each management address.
cluster_id Indicates the ID of a clustered system.
cluster_name Indicates the name of a system. When you use this parameter, the detailed view of the specific system is displayed and any value that you specified by the -filtervalue parameter is ignored. If you do not specify the cluster_name parameter, the concise view of all systems that match the filtering requirements that are specified by the -filtervalue parameter are displayed.
cluster_status Indicates that the error code is the same as the one displayed on the front panel.
cluster_ip_count Indicates the maximum number of management addresses you can configure.
cluster_ip_port Indicates the system IP port. This field is repeated for each management address.
cluster_ip Indicates the Internet Protocol Version 4 (IPv4) management IP address. This field is repeated for each management address.
cluster_gw Indicates the IPv4 management IP gateway. This field is repeated for each management address.
cluster_mask Indicates the IPv4 management IP mask. This field is repeated for each management address.
cluster_ip_6 Indicates the Internet Protocol Version 6 (IPv6) management IP address. This field is repeated for each management address.
cluster_gw_6 Indicates the IPv6 management IP gateway. This field is repeated for each management address.
cluster_prefix_6 Indicates the IPv6 management IP prefix. This field is repeated for each management address.
node_id Indicates the ID of the node that is being configured. The value is a number.
node_name Indicates the name of the node that is being configured.
node_status Indicates the node status. The values are:
  • active indicates that the node is part of a system and can perform I/O.
  • service indicates that the node is in service mode, standby mode, or node rescue mode.
  • candidate indicates that the node is not part of a system.
  • starting indicates that the node is part of a system and is attempting to join the system.
  • spare indicates that the node is a spare node.
config_node Indicates whether it is a configuration node. The values are yes or no.
hardware Indicates the hardware type.
service_IP_address Indicates the IPv4 service address for the node.
service_gateway Indicates the IPv4 service gateway for the node.
service_subnet_mask Indicates the IPv4 service mask for the node.
service_IP_address_6 Indicates the IPv6 service address for the node.
service_gateway_6 Indicates the IPv6 service gateway for the node.
service_prefix_6 Indicates the IPv6 service prefix for the node.
node_IP_address Indicates the IPv4 management node IP address, which the system uses for node discovery and IP clustering.
node_gateway Indicates the IPv4 management node IP gateway.
node_subnet_mask Indicates the IPv4 management node IP mask.
node_code_version Indicates the version of system code for the node.
node_code_build Indicates the build string for code on the node.
cluster_sw_build Indicates the CSM build that the system is running.
node_error_count Indicates the number of node errors.
node_error_data Indicates the type of node errors.
FC_port_count Indicates the number of FC ports. This field is repeated for each management address.
FC_port_id Indicates the port ID. This field is repeated for each management address.
port_status Indicates the port status. This value must match the port on the front panel, enclosure, or canister.
port_speed Indicates the port speed. This value must match the port speed on the front panel, enclosure, or canister.
port_WWPN Indicates the worldwide port number of the port.
SFP_type Indicates the SFP type. The values are long-wave or short-wave.
ethernet_port_count Indicates the number of detected Ethernet ports.
ethernet_port_id Indicates the ID of an Ethernet port.
port_status Indicates the port status. The values are:
  • online
  • offline
  • not configured
online | offline | not configured
port_speed Indicates the port speed. The values are:
  • 10 Mbps
  • 100 Mbps
  • 1 Gbps
  • 10 Gbps
  • 25 Gbps
  • full
  • half
MAC Indicates a single MAC address.
vnport_count Indicates the number of VN ports that are created on top of each physical Fibre Channel over Ethernet (FCoE) port.
vnport_id Indicates the VN port ID.
vnport_wwpn Indicates the WWPN assigned to the VN port.
vnport_FCF_mac Indicates the MAC address for the FCF to which the VN port is connected.
vnport_vlanid Indicates the VLAN ID used by the VN port. The value is blank for FC ports.
product_mtm Indicates the machine type and model.
product_serial Indicates the node serial number.
disk_WWNN_prefix The most recently used WWNN prefix.
node_WWNN Indicates the last active WWNN stored in the node; blank if no system data.
enclosure_WWNN_1 Indicates the first canister WWNN from the enclosure VPD.
enclosure_WWNN_2 Indicates the second canister WWNN from the enclosure VPD.
node_part_identity Indicates the 11S string from the hardware VPD.
node_FRU_part Indicates the node field-replaceable unit (FRU) part number, if stored in node VPD
enclosure_part_identity Indicates the S11 data.
PSU_count Indicates the number of expected PSUs (two).
PSU_id Indicates the ID of the slot the PSU is in. The value is a number.
PSU_status Indicates the PSU status. The status is missing, failed, or active.
time_to_charge Indicates the estimated time (in minutes) needed for 50% of the battery to be charged.
Battery_charging Indicates the percentage of charge of the batteries.
Battery_count Indicates the number of expected batteries (two).
Battery_id Indicates the ID of the slot the battery is in.
Battery_status Indicates that the status is missing, failed, charging, or active.
Battery_FRU_part Indicates the FRU part number of the battery.
Battery_part_identity Indicates the 11S FRU identity of the battery (includes the serial number).
Battery_fault_led Indicates thee fault light-emitting diode (LED) status.
Battery_charging_status Indicates the battery charge status.
Battery_cycle_count Indicates the number of charge or discharge cycles that are performed by the battery.
Battery_powered_on_hours Indicates the number of hours the battery is in a powered node.
Battery_last_recondition Indicates the system time stamp of the last successful gas gauge calibration.
Battery_midplane_FRU_part Indicates the FRU part number of the battery midplane
Battery_midplane_part_identity Indicates the 11S FRU identity of the battery midplane (which includes the serial number).
Battery_midplane_FW_version Indicates the firmware version that is running on the battery midplane.
Battery_power_cable_FRU_part Indicates the FRU part number of the battery power cable.
Battery_power_sense_cable_FRU_part Indicates the FRU part number of the battery midplane power sense cable.
Battery_comms_cable_FRU_part Indicates the FRU part number of the battery midplane communication cable.
Battery_EPOW_cable_FRU_part Indicates the FRU part number of the battery midplane EPOW cable.
identify_LED Indicates that the node or node canister identify LED state (on, off, or blank).
password_reset_enabled Indicates whether the superuser password reset is enabled (yes or no).
node_location_copy Indicates the node location copy status. This value is equivalent to the panel name and is blank if a node is removed from a system.
node_product_mtm_copy Indicates the node product machine type copy status. This value is equivalent to panel product_mtm; blank if a node is removed from a system.
node_product_serial_copy Indicates the node product serial copy status. This value is equivalent to product_serial; blank if a node is removed from a system.
node_WWNN_1_copy Indicates the node WWNN first copy status. This value is equivalent to enclosure_WWNN_1; blank if a node is removed from a system.
node_WWNN_2_copy Indicates the node WWNN second copy status. This value is equivalent to enclosure_WWNN_2; blank if a node is removed from a system.
latest_cluster_id Indicates the system ID running on the current enclosure; blank if a node is removed from a system.
next_cluster_id Indicates the system ID running on the current enclosure; blank if a node is removed from a system.
node_usb Indicates whether the USB ports are enabled for use (on) or disabled (off).
rdma_type A semicolon separated list that displays the RDMA protocol capabilities of the port. This field is blank for non-RDMA capable Ethernet ports.

An invocation example


sainfo lsservicestatus

The resulting output:


panel_name 78257BG-1
cluster_id
cluster_name
cluster_status
cluster_ip_count 2
cluster_port 1
cluster_ip
cluster_gw
cluster_mask
cluster_ip_6
cluster_gw_6
cluster_prefix_6
cluster_port 2
cluster_ip
cluster_gw
cluster_mask
cluster_ip_6
cluster_gw_6
cluster_prefix_6
node_id
node_name
node_status Candidate
config_node No
hardware 600
service_IP_address
service_gateway
service_subnet_mask
service_IP_address_6
service_gateway_6
service_prefix_6
node_code_version 8.2.0.0
node_code_build 145.23.0000000000000
cluster_code_build
node_error_count 1
error_code 734
error_data 1 1 0
fc_ports 0
ethernet_ports 5
ethernet_port_id 1
port_status Not Configured
port_speed 100Mb/s - Full
MAC 40:f2:e9:71:9d:52
node_IP_address
node_gateway
node_subnet_mask
rdma_type
ethernet_port_id 2
port_status Not Configured
port_speed
MAC 40:f2:e9:71:9d:50
node_IP_address
node_gateway
node_subnet_mask
rdma_type
ethernet_port_id 3
port_status
port_speed
MAC 40:f2:e9:71:9d:53
node_IP_address
node_gateway
node_subnet_mask
rdma_type
ethernet_port_id 4
port_status
port_speed
MAC 00:07:43:42:3b:08
node_IP_address
node_gateway
node_subnet_mask
rdma_type iWARP
ethernet_port_id 5
port_status
port_speed
MAC 00:07:43:42:3b:00
node_IP_address
node_gateway
node_subnet_mask
rdma_type iWARP
product_mtm 2076-624
product_serial 78257BG
time_to_charge 0
battery_charging 0
dump_name 78257BG-1
node_WWNN
disk_WWNN_suffix
panel_WWNN_suffix
UPS_serial_number
UPS_status
enclosure_WWNN_1 500507680b00d3d0
enclosure_WWNN_2 500507680b00d3d1
node_part_identity 11S01YM082YM10BG86D02N
node_FRU_part 01LJ743
enclosure_identity 11S00MJ255YM10BG86P02T
PSU_count 0
PSU_id 1
PSU_status
PSU_id 2
PSU_status
Battery_count 0
node_location_copy 1
node_product_mtm_copy 2076-624
node_product_serial_copy 78257BG
node_WWNN_1_copy 500507680b00d3d0
node_WWNN_2_copy 500507680b00d3d1
latest_cluster_id 0
next_cluster_id 10020a0b482
console_IP
has_nas_key no
fc_io_ports 0
service_IP_mode
service_IP_mode_6
machine_part_number
node_machine_part_number_copy
local_fc_port_mask 1111111111111111111111111111111111111111111111111111111111111111
partner_fc_port_mask 1111111111111111111111111111111111111111111111111111111111111111
topology standard
site_id
site_name
password_reset_enabled no
identify_LED off
Battery_midplane_FRU_part
Battery_midplane_part_identity
Battery_midplane_FW_version
Battery_power_cable_FRU_part
Battery_power_sense_cable_FRU_part
Battery_comms_cable_FRU_part
Battery_EPOW_cable_FRU_part
product_name IBM Storwize V7000
techport
fcportmap 
node_usb off