Caution notices for the uninterruptible power supply
Ensure that you understand the caution notices for the uninterruptible power supply.
Use the reference numbers in parentheses at the end of each notice (for example, D005) to find the matching translated notice in IBM System Storage SAN Volume Controller Safety Notices.
CAUTION:
Lead-acid batteries can present a risk of electrical burn from high,
short-circuit current. Avoid battery contact with metal materials; remove watches, rings, or other
metal objects, and use tools with insulated handles. To avoid possible explosion, do not burn.
(C004)
CAUTION:
This part or unit is heavy but has a weight smaller than 18 kg (39.7
lb). Use care when lifting, removing, or installing this part or unit. (C008)
CAUTION:
CAUTION:
The uninterruptible power
supply
contains its own energy source (sealed, lead-acid batteries). The output receptacles might carry
live voltage, even when the uninterruptible power
supply is not
connected to an AC supply. (11)
CAUTION:
Do not remove or unplug the input cord when the uninterruptible power
supply is turned on. Unplugging the input
cord removes the safety ground from the uninterruptible power
supply and the equipment connected to the uninterruptible power
supply. (12)
CAUTION:
To reduce the risk of fire or electric shock, install the uninterruptible power
supply in a temperature- and
humidity-controlled indoor environment, free of conductive contaminants. Ambient temperature must
not exceed 40°C (104°F). Do not operate near water or excessive humidity (95% maximum). (13)