SAN Volume Controller 2145-CG8 parts
You might have to replace a SAN Volume Controller 2145-CG8 field-replaceable unit (FRU).
Figure 1 Shows how the different parts of the SAN Volume Controller 2145-CG8 are assembled.
| Assembly index | FRU part | Quantity | Description |
|---|---|---|---|
| - 1 | 43V7066 | 0-1 | Empty riser card The SAN Volume Controller 2145-CG8 slot 2 connector has one of three adapters, either this one by default, or one of the optional adapters. |
| - 1 | 31P1559 | 0-1 | Optional 10 gigabits-per-second (Gbps) Ethernet
riser-card assembly An assembly that includes a 10 Gbps Ethernet adapter that provides connectivity for up to two 10 Gbps fiber optic Ethernet cables. The assembly includes a riser card, a blanking plate, and 2 M3 screws. |
| - | 31P1549 | 0-2 | 10 Gbps Ethernet Fibre SW SFP |
| - 2 | 31P1337 | 1 | 4-port Fibre Channel adapter The Fibre
Channel host bus adapter (HBA) assembly connects the SAN Volume Controller
2145-CG8 to the Fibre Channel fabric. It
is required to be present in PCI slot 1. A second adapter is available
as an optional feature for PCI slot 2.The adapter assembly includes
the Fibre Channel PCI Express adapter, four shortwave SFPs, the riser
card, and the bracket.
Important: If the system is using
alternative SFPs, replace the SFPs on the FRU part with the SFPs from
the Fibre Channel adapter that is being replaced.
|
| - | 31P1338 | 0-4 | Shortwave SFP The small form-factor pluggable
(SFP) transceiver provides an auto-negotiating 2, 4, or 8 Gbps shortwave
optical connection on the 4-port Fibre Channel adapter.
Note: This
is a non-ROHS compliant part. Use part 31P1338 unless the system is
in a country which requires ROHS compliant parts, in which case, use
part 31P1630.
Important: It is possible that SFPs
other than those shipped with the product are in use on the Fibre
Channel host bus adapter. It is a customer responsibility to obtain
replacement parts for such SFPs. The FRU part number is shown as "Non
standard - supplied by customer" in the vital product data.
|
| - | 31P1630 | 0-4 | Shortwave SFP The small form-factor pluggable
(SFP) transceiver provides an auto-negotiating 2, 4, or 8 Gbps shortwave
optical connection on the 4-port Fibre Channel adapter.
Note: This
is an ROHS compliant SFP. Use part 31P1338 unless the system is in
a country which requires ROHS compliant parts, in which case, use
part 31P1630.
Important: It is possible that SFPs
other than those shipped with the product are in use on the Fibre
Channel host bus adapter. It is a customer responsibility to obtain
replacement parts for such SFPs. The FRU part number is shown as "Non
standard - supplied by customer" in the vital product data.
|
| - 3 | 49Y1446 | 3 | Memory module 8 GB 2Rx4 2 Gbit DDR3 1333 MHz ECC LP RDIMM |
| - 4 | 33F8354 | 1 | CMOS battery 3.0 volt battery on the system board that maintains power to back up system BIOS settings. |
| - 5 | 39Y7236 | 2 | Power supply unit 675 Watt ac |
| - | 31P1294 | 1 | Power cable assembly The cable assembly connects the SAN Volume Controller and the 2145 UPS-1U. The assembly consists of 2 power cables bundled with a serial cable. |
| - 6 | 44E4372 | 1 | Operator-information
panel This assembly includes the information panel that contains the power-control button and diagnostic LEDs. |
| - 7 | 42D0673 | 1 | Disk drive The serial-attached SCSI (SAS) 2.5 inch disk drive, when ordered as a replacement, can be a supported compatible drive of at least the same capacity as the one being replaced. |
| - 9 | 44T2248 | 2-6 | Drive bay blank EMC filler assembly |
| - 10 | 31P1557 | 1 | Service controller The service controller includes the front-panel display, buttons, and associated electronics. |
| - | 31P1540 | 1 | Service controller cable The USB cable is used to connect the service controller to the system board. |
| - 11 | 59Y3915 | 2 | Disk backplane Hot-swap SAS 2.5 inch disk-drive backplane |
| - | 59Y3918 | 1 | Disk signal cable 200 mm SAS disk signal cable for the 2.5 inch SAS system disk. This is a Y cable; one end connects to the system board and the other two ends connect to the two drive backplanes. |
| - | 59Y3920 | 1 | Disk power cable Power cable for the 2.5 inch SAS system disk. This is a Y cable; one end connects to system board and the other two ends connect to the two drive backplanes. |
| - | 59Y3461 | 1 | Backplane control cable |
| - 12 | 43V6929 | 6 | Fan assembly The fan assembly is used in each of the six fan positions. |
| - 13 | 000D3284 | 1 | System board The system board is also called the planar. Important: This part
is the system board only. When replaced, you must also have alcohol
wipes and thermal grease.
|
| - 14 | 46M0861 | 1 | Disk controller SAS controller for the SAS 2.5 inch disk drive that does not include the riser card. |
| - 15 | 43V7067 | 1 | Disk controller riser card with USB connector Riser card that connects the disk controller to the system board and provides the USB port to which the service controller cable connects. |
| - 16 | 49Y7052 | 0 - 1 | Microprocessor E5630 2.53 GHz 4-core microprocessor 80 W Important: This part is the microprocessor
only. A 4-core processor must be replaced with a 4-core FRU part.
When replaced, you must also have alcohol wipes and thermal grease.
|
| - 16 | 69Y4714 | 0 - 1 | Microprocessor IntelR XeonR Processor E5645 6-core 2.4 GHz 12 MB 5.86 GT/s QPI 80 W Important: This
part is the microprocessor only. A 6-core processor must be replaced
with a 6-core FRU part. When replaced, you must also have alcohol
wipes and thermal grease.
|
| Description | Part number | Quantity |
|---|---|---|
| Node cable retention bracket | 31P1402 | 2 |
| Thermal grease | 41Y9292 | 1 |
| Heat sink | 49Y4820 | 1 |
| Alcohol wipes | 59P4739 | 1 |
| Top cover | 59Y3790 | 1 |
| Air baffle kit (microprocessor and memory) | 59Y3779 | 1 |
| Support rails | 69Y4391 | 1 |
| Cable management arm assembly | 69Y4392 | 1 |
| Description | Part number | Quantity | Feature Code |
|---|---|---|---|
| High-speed SAS adapter An assembly that includes a high-speed SAS adapter that provides connectivity for up to four flash drives. The assembly includes a riser card, a blanking plate, and two M3 screws. |
31P1340 | 1 | 4500 |
| High-speed SAS cable This cable connects the high-speed SAS adapter to the disk backplane. |
41Y3884 | 1 | |
| 164 GB Flash drive | 31P1342 | 1 - 4 | 4601 |
| 200 GB Flash drive | 31P1611 | 1 - 4 | 4602 |
| 400 GB Flash drive | 31P1609 | 1 - 4 | 4604 |
| Description | Part number | Quantity | Feature Code |
|---|---|---|---|
| Long-wave SFP transceiver FRU Important: It is possible that an SFP transceiver other than those shipped with the
product is in use on the Fibre Channel host bus adapter. It is a customer
responsibility to obtain replacement parts for such an SFP transceiver. The FRU part number is shown as
"Non standard - supplied by customer" in the vital product data.
|
31P1658 | 1 - 4 | 5608 |