SAN Volume Controller 2145-CF8 connectors

External connectors that the SAN Volume Controller 2145-CF8 uses include four Fibre Channel ports, a serial port, two Ethernet ports, and two power connectors.

Figure 1 shows the external connectors on the SAN Volume Controller 2145-CF8 back panel assembly.

Figure 1. Connectors on the rear of the SAN Volume Controller 2145-CG8 or 2145-CF8
This figure identifies the connectors on the rear of the SAN Volume Controller 2145-CG8 or 2145-CF8 node.
  •  1  Fibre Channel port 1
  •  2  Fibre Channel port 2
  •  3  Fibre Channel port 3
  •  4  Fibre Channel port 4
  •  5  Power cord connector for power supply 1
  •  6  Power cord connector for power supply 2
  •  7  Serial connection for UPS communication cable
  •  8  Ethernet port 2
  •  9  Ethernet port 1

Figure 2 shows the type of connector that is located on each power-supply assembly. Use these connectors to connect the SAN Volume Controller 2145-CF8 to the two power cables from the uninterruptible power supply.

Figure 2. Power connector
This figure shows the power connector.
Parent topic: External connectors on the SAN Volume Controller node