SAN Volume Controller 2145-CG8 connectors

External connectors that the SAN Volume Controller 2145-CG8 uses include four Fibre Channel ports, a serial port, two Ethernet ports, and two power connectors. The 2145-CG8 also has external connectors for the 10 Gbps Ethernet feature.

These figures show the external connectors on the SAN Volume Controller 2145-CG8 back panel assembly.

Figure 1. Connectors on the rear of the SAN Volume Controller 2145-CG8
This figure shows the connectors on the rear of the SAN Volume Controller 2145-CG8.
  •  1  Fibre Channel port 1
  •  2  Fibre Channel port 2
  •  3  Fibre Channel port 3
  •  4  Fibre Channel port 4
  •  5  Power cord connector for power supply 1
  •  6  Power cord connector for power supply 2
  •  7  Serial connection for UPS communication cable
  •  8  Ethernet port 2
  •  9  Ethernet port 1
Figure 2. 10 Gbps Ethernet ports on the rear of the SAN Volume Controller 2145-CG8
This figure shows the 10 Gbps Ethernet ports on the rear of the SAN Volume Controller 2145-CG8
  •  1  10 Gbps Ethernet port 3
  •  2  10 Gbps Ethernet port 4
  • Fibre Channel port 5 (not shown)
  • Fibre Channel port 6 (not shown)
  • Fibre Channel port 7 (not shown)
  • Fibre Channel port 8 (not shown)

Figure 3 shows the type of connector that is located on each power-supply assembly. Use these connectors to connect the SAN Volume Controller 2145-CG8 to the two power cables from the uninterruptible power supply.

Figure 3. Power connector
This figure shows the power connector.
Parent topic: External connectors on the SAN Volume Controller node