Configuration data table guidelines
You must complete the configuration data table before the SAN Volume Controller nodes can be installed.
You can download the configuration data table from the following website:
Include the following initial settings for the clustered system:
| Term | Description |
|---|---|
| Language | The national language in which you want the messages that are displayed on the front panel. The default setting is English. |
| Port 1 | |
| Management IPv4 address | IPv4 address that is used for typical configuration and service access to the system |
| Service IPv4 address | IPv4 address that is used for service access to a node from the system |
| Gateway IPv4 address | IPv4 address for the default local gateway for the system |
| IPv4 subnet mask | IPv4 subnet mask, which identifies the IPv4 network the system is operating on |
| Management IPv6 address | IPv6 address that is used for typical configuration and service access to the system |
| Service IPv6 address | IPv6 address that is used for service access to a node from the system |
| Gateway IPv6 address | IPv6 address for the default local gateway for the system |
| IPv6 prefix | The system prefix, which identifies the IPv6 network the system is operating on |