Connecting the redundant AC-power switch to the site power

You must connect the redundant AC-power switch to the site power before you test the redundant AC-power switch.

About this task

Complete the following steps to connect the redundant AC-power switch to the site power:

Procedure

  1. Determine a suitable cable route from the redundant AC-power switch to the power distribution units.
  2. Route the main input-power cable of the redundant AC-power switch to the specified power distribution unit, and connect it.
  3. Route the backup input-power cable of the redundant AC-power switch to the specified power distribution unit, and connect it.
  4. Verify that the redundant AC-power switch power cables are tidy. Ensure that they do not obstruct other equipment and that they are tied in place where necessary.
Parent topic: Installing the optional redundant AC-power switch