SAN Volume Controller controls and indicators
The controls and indicators are used for power and navigation and to indicate information such as system activity, service and configuration options, service controller failures, and node identification.
- SAN Volume Controller 2145-92F expansion enclosure LEDs and indicators
The 2145-92F expansion enclosure has several sets of LEDs that provide information about the overall status of the enclosure, power, drives, fans, canisters, and SAS connections. - SAN Volume Controller 2145-24F and 2145-12F expansion canister LEDs
Each SAN Volume Controller 2145-24F and 2145-12F expansion canister has three LEDs that provide status and identification for the expansion canister. - SAN Volume Controller 2145-24F and 2145-12F expansion canister SAS ports and indicators
Two SAS ports are located in the rear of the SAN Volume Controller 2145-24F and 2145-12F expansion canister. - SAN Volume Controller 2145-SV1 front panel controls and indicators
The controls and indicators on the front panel are used for power and to indicate information such as system activity, node failures, and node identification. - SAN Volume Controller 2145-DH8 front panel controls and indicators
The controls and indicators on the front panel are used for power and to indicate information such as system activity, node failures, and node identification. - SAN Volume Controller 2145-DH8 internal connectors, LEDs, and jumpers
View the LEDs, connectors, and jumpers on the internal boards of each SAN Volume Controller 2145-DH8. Illustrations might differ slightly from your hardware. - SAN Volume Controller 2145-CG8 controls and indicators
The controls and indicators are used for power and navigation and to indicate information such as system activity, service and configuration options, service controller failures, and node identification. - SAN Volume Controller 2145-CF8 controls and indicators
The controls and indicators are used for power and navigation and to indicate information such as system activity, service and configuration options, service controller failures, and node identification. - Battery status LED
The status of the battery backup system is indicated by the green battery status LED with the battery symbol. - Battery fault LED
A fault with a battery is indicated by the amber battery fault LED on the battery unit. - Check LED
The amber check LED is used to indicate critical failures on the service controller. - Error LED
Critical faults on the service controller are indicated through the amber error LED. - Front-panel display
The front-panel display shows service, configuration, and navigation information. - Node fault LED
A node fault is indicated by the amber node-fault LED. - Navigation buttons
You can use the navigation buttons to move through menus. - Node status LED
System activity is indicated through the green node-status LED. - Node identification label
The node identification label on the front panel displays a six-digit node identification number. Sometimes this number is called the panel name or front panel ID. - Product serial number
The node contains a SAN Volume Controller product serial number that is written to the system board hardware. The product serial number is also printed on the serial number label which is located on the front panel. - Select button
Use the select button to select an item from a menu. - SAN Volume Controller operator-information panel
The operator-information panel is located on the front panel of the SAN Volume Controller .
Parent topic: Reference