Removing the support rails: 2145 UPS-1U

You can remove the support rails for the 2145 UPS-1U.

1. Loosen and remove the two M6 × 10 screws from each side of the 2145 UPS-1U ( 1  in Figure 1).
   Figure 1. Removing the front screws from the 2145 UPS-1U

   
2. Remove the 2145 UPS-1U from the rack.
3. Remove the clip nut from the top hole of the rail ( 3  in Figure 2).
   Figure 2. Removing the front rail on the 2145 UPS-1U

   
4. Detach the M6 × 10 screw ( 1 ) from the clip nut ( 2 ) in the bottom hole of the rail.
5. Remove the two M6 × 10 screws from the rear side of the rail ( 1  in Figure 3) and the two clip nuts ( 2 ).
   Figure 3. Removing the rear rail on the 2145 UPS-1U

   
6. Remove the rail from the rack.
7. Repeat steps 3 through 6 to remove the other rail from the rack.