MAP 6000: Replace offline SSD

MAP 6000: This procedure replaces a flash drive that has failed while it is still a member of a storage pool.

Before you begin

If you are not familiar with these maintenance analysis procedures (MAPs), first read Using the maintenance analysis procedures.

This map applies to models with internal flash drives. Be sure that you know which model you are using before you start this procedure. To determine which model you are working on, look for the label that identifies the model type on the front of the node.

About this task

Use this MAP to determine which detailed MAP to use for replacing an offline SSD.

Attention: If the drive use property is member and the drive must be replaced, contact IBM support before taking any actions.

Procedure

Are you using an SSD in a RAID 0 array and using volume mirroring to provide redundancy?

Yes: Go to MAP 6001: Replace offline SSD in a RAID 0 array.
No: Go to MAP 6002: Replace offline SSD in RAID 1 array or RAID 10 array.