Checking and controlling the Spectrum Control Base service

At any time, you can check whether the IBM® Spectrum Control Base Edition service runs properly on the Linux host. You can also stop and then start the service if needed.

Procedure

  1. Log on to the Linux command prompt environment as a root user.
  2. Enter the following command: service ibm_spectrum_control status. The status of the Celery and Django services is displayed.
    [root@ibmsc]# service ibm_spectrum_control status
Celery services are running...
Django service is running...
vWC refresh service is running...

What to do next

If you want to stop the Spectrum Control Base service, use the stop command:
[root@ibmsc]# service ibm_spectrum_control stop
Stopping ibm_spectrum_control (via systemctl): [  OK  ]
To start the service again, use the start command:
[root@ibmsc]# service ibm_spectrum_control start
Starting ibm_spectrum_control (via systemctl): [  OK  ]
If you want to stop and then start the Spectrum Control Base service in one command, use the restart command:
[root@ibmsc]# service ibm_spectrum_control restart
Restarting ibm_spectrum_control (via systemctl): [  OK  ]