Node controls and indicators
The controls and indicators provide information about the system status and activity. They also help to identiy the node.
- SAN Volume Controller 2145-92F expansion enclosure LEDs and indicators
The 2145-92F expansion enclosure has several sets of LEDs that provide information about the overall status of the enclosure, power, drives, fans, canisters, and SAS connections. - SAN Volume Controller 2145-24F and 2145-12F expansion canister LEDs
Each SAN Volume Controller 2145-24F and 2145-12F expansion canister has three LEDs that provide status and identification for the expansion canister. - SAN Volume Controller 2145-24F and 2145-12F expansion canister SAS ports and indicators
Two SAS ports are located in the rear of the SAN Volume Controller 2145-24F and 2145-12F expansion canister. - SAN Volume Controller 2145-SV1 front panel controls and indicators
The controls and indicators on the front panel are used for power and to indicate information such as system activity, node failures, and node identification. - SAN Volume Controller 2145-SV1 internal connectors and LEDs
View the LEDs and connectors on the internal boards of each SAN Volume Controller 2145-SV1 . Illustrations might differ slightly from your hardware. - SAN Volume Controller 2145-DH8 front panel controls and indicators
The controls and indicators on the front panel are used for power and to indicate information such as system activity, node failures, and node identification. - SAN Volume Controller 2145-DH8 internal connectors, LEDs, and jumpers
View the LEDs, connectors, and jumpers on the internal boards of each SAN Volume Controller 2145-DH8. Illustrations might differ slightly from your hardware. - Battery status LED
The status of the battery backup system is indicated by the green battery status LED with the battery symbol. - Battery fault LED
A fault with a battery is indicated by the amber battery fault LED on the battery unit. - Node fault LED
A node fault is indicated by the amber node-fault LED. - Node status LED
System activity is indicated through the green node-status LED. - Product serial number
The node contains a product serial number that is written to the system board hardware. The product serial number is also printed on the serial number label that is on the front panel. - Nodeoperator-information panel
The operator-information panel is located on the front panel of the node.
Parent topic: Reference
Related reference: