Fields for the node VPD

The node vital product data (VPD) provides information for items such as the system board, batteries, processor, fans, memory module, adapter, devices, software, front panel assembly, serial-attached SCSI (SAS) flash drive and SAS host bus adapter (HBA).

Table 1 shows the fields that you see for the system board.

Table 1. Fields for the system board
Item	Field name
System board	Part number
	System serial number
	Number of processors
	Number of memory slots
	Number of fans
	Number of Fibre Channel adapters
	Number of SCSI, IDE, SATA, or SAS devices
	Number of compression accelerator adapters
	Number of power supplies
	Number of high-speed SAS adapters
	BIOS manufacturer
	BIOS version
	BIOS release date
	System manufacturer
	System product
	Planar manufacturer
	Power supply part number
	CMOS battery part number
	Power cable assembly part number
	Service processor firmware
	SAS controller part number

Table 2 shows the fields that you see for the batteries.

Table 2. Fields for the batteries
Item	Field name
Batteries	Battery_FRU_part
	Battery_part_identity
	Battery_fault_led
	Battery_charging_status
	Battery_cycle_count
	Battery_power_on_hours
	Battery_last_recondition
	Battery_midplane_FRU_part
	Battery_midplane_part_identity
	Battery_midplane_FW_version
	Battery_power_cable_FRU_part
	Battery_power_sense_cable_FRU_part
	Battery_comms_cable_FRU_part
	Battery_EPOW_cable_FRU_part

Table 3 shows the fields that you see for each processor that is installed.

Table 3. Fields for the processors
Item	Field name
Processor	Part number
	Processor location
	Manufacturer
	Version
	Speed
	Status
	Processor serial number

Table 4 shows the fields that you see for each fan that is installed.

Table 4. Fields for the fans
Item	Field name
Fan	Part number
Fan	Location

Table 5 shows the fields that are repeated for each installed memory module.

Table 5. Fields that are repeated for each installed memory module
Item	Field name
Memory module	Part number
	Device location
	Bank location
	Size (MB)
	Manufacturer (if available)
	Serial number (if available)

Table 6 shows the fields that are repeated for each installed adapter.

Table 6. Fields that are repeated for each adapter that is installed
Item	Field name
Adapter	Adapter type
	Part number
	Port numbers
	Location
	Device serial number
	Manufacturer
	Device
	Adapter revision
	Chip revision

Table 7 shows the fields that are repeated for each device that is installed.

Table 7. Fields that are repeated for each SCSI, IDE, SATA, and SAS device that is installed
Item	Field name
Device	Part number
	Bus
	Device
	Model
	Revision
	Serial number
	Approximate capacity
	Hardware revision
	Manufacturer

Table 8 shows the fields that are specific to the node software.

Table 8. Fields that are specific to the node software
Item	Field name
Software	Code level
	Node name
	Worldwide node name
	ID
	Unique string that is used in dump file names for this node

Table 9 shows the fields that are provided for the front panel assembly.

Table 9. Fields that are provided for the front panel assembly
Item	Field name
Front panel	Part number
	Front panel ID
	Front panel locale

Table 10 shows the fields that are provided for the Ethernet port.

Table 10. Fields that are provided for the Ethernet port
Item	Field name
Ethernet port	Port number
	Ethernet port status
	MAC address
	Supported speeds

Table 11 shows the fields that are provided for the power supplies in the node.

Table 11. Fields that are provided for the power supplies in the node
Item	Field name
Power supplies	Part number
Power supplies	Location

Table 12 shows the fields that are provided for the SAS host bus adapter (HBA).

Table 12. Fields that are provided for the SAS host bus adapter (HBA)
Item	Field name
SAS HBA	Part number
	Port numbers
	Device serial number
	Manufacturer
	Device
	Adapter revision
	Chip revision

Table 13 shows the fields that are provided for the SAS flash drive.

Table 13. Fields that are provided for the SAS flash drive
Item	Field name
SAS SSD	Part number
	Manufacturer
	Device serial number
	Model
	Type
	UID
	Firmware
	Slot
	FPGA firmware
	Speed
	Capacity
	Expansion tray
	Connection type

Table 14 shows the fields that are provided for the small form factor pluggable (SFP) transceiver.

Table 14. Fields that are provided for the small form factor pluggable (SFP) transceiver
Item	Field name
Small form factor pluggable (SFP) transceiver	Part number
	Manufacturer
	Device
	Serial number
	Supported speeds
	Connector type
	Transmitter type
	Wavelength
	Maximum distance by cable type
	Hardware revision
	Port number
	Worldwide port name