SAN Volume Controller 5U expansion enclosure parts
On the 2145-92F (5U) expansion enclosure, all replaceable parts are field-replaceable units (FRUs). FRUs are replaced by your IBM® service support representatives (SSRs). The expansion enclosure does not have any customer replaceable parts (CRUs).
Expansion enclosure drives
Table 1 summarizes the types of SAS drives that are supported by the 2145-92F expansion enclosure on SAN Volume Controller 2145-DH8 and SAN Volume Controller 2145-SV1 systems. For information about other supported features, see Optional features.
| FRU part number | Description |
|---|---|
| 01LJ061 | 600 GB 15 K disk drive |
| 01LJ062 | 1.2 TB 10 K disk drive |
| 01LJ063 | 1.8 TB 10 K disk drive |
| 01LJ064 | 6 TB 7.2 K Near-Line SAS disk drive |
| 01LJ065 | 8 TB 7.2 K Near-Line SAS disk drive |
| 01LJ066 | 10 TB 7.2 K Near-Line SAS disk drive |
| 01LJ073 | 1.6 TB tier 0 flash drive |
| 01LJ074 | 3.2 TB tier 0 flash drive |
| 01LJ075 | 1.92 TB tier 1 flash drive |
| 01LJ076 | 3.84 TB tier 1 flash drive |
| 01LJ077 | 7.68 TB tier 1 flash drive |
| 01LJ078 | 15.36 TB tier 1 flash drive |
| 01LJ827 | 900 GB 15 K disk drive |
| 01YM178 | 2.4 TB 10 K disk drive |
| 01YM179 | 12 TB 7.2 K Near-Line SAS disk drive |
Other expansion enclosure parts
Table 2 summarizes the part numbers for other parts. The values are the same for all SAN Volume Controller systems that support the 2145-92F expansion enclosure.
| FRU Part Number | Description | Comments |
|---|---|---|
| 00AR317 | 3 m 12 Gb SAS Cable (mSAS HD) | |
| 01EJ190 | 6 m 12 Gb SAS Cable (mSAS HD) | |
| 01LJ114 | Rail kit | |
| 01LJ116 | Front fascia (4U front cover) | |
| 01LJ118 | Display panel assembly | |
| 01LJ120 | PSU fascia (1U cover) | The fascia must be removed to access the power supply units. |
| 01LJ122 | Power supply unit (PSU) | The expansion enclosure contains 2 PSUs. Each PSU requires a C19/C20 power cord. |
| 01LJ124 (use with enclosure FRU P/N 01LJ112) 01LJ860 (use with enclosure FRU P/N 01LJ607 |
Secondary expansion module | The expansion enclosure supports two-secondary expansion modules. CAUTION: Use caution when you are removing or replacing a secondary expansion module from an
enclosure with FRU part number 01LJ112. Avoid contact with the connectors on the main
board.
|
| 01LJ126 | Fan module | The expansion enclosure contains four fan modules. |
| 01LJ128 | Expansion canister | |
| 01LJ130 | Cable management arms (CMA) | The part contains the upper and lower CMA. |
| 01LJ132 | Top cover | |
| 01LJ134 | Fan interface board | |
| 01LJ607 | Enclosure Note: Replaces enclosure FRU P/N 01LJ112.
|
Includes the drive board, signal interconnect board, and internal power cables, in an otherwise empty enclosure. |
| 39M5388 | 16A power cord C19/C20 2 m |