Notes: The weight of the enclosure can be reduced below 18 kg by first
labeling and removing each canister, drive assembly, and power supply unit from the enclosure.
Ensure that all components are labeled such that they can be replaced in the same slots from
which they are removed.
Set each component aside in a safe location.
Never apply physical shock to a drive assembly, as it might damage the drive or the data on
it.
Locate the left support rail.
Record the shelf number of the support rail so that the replacement
rails can be installed into the same position.
At the rear of the rack, remove the
securing M5 screw from the bottom hole of the rear bracket of the
rail, then open the rear hinge bracket (Figure 1).
Figure 1. Opening rear hinge bracket
of mounting rail
At the front of the rack, hold onto the rail and open the
front hinge bracket.
Compress the rail against its spring
to shorten it, then remove it from inside the rack (Figure 2).
