Determining the Fibre Channel port speed

You can use several methods to determine the port speed of a Fibre Channel port on a node.

Determining the Fibre Channel port speed with the management GUI

If the node is in a system that is operational, you can determine the Fibre Channel port speed with the management GUI.

To view the Fibre Channel port speed in the management GUI, complete these steps:

Select Monitoring > System.
On the System -- Overview page, select the directional arrow next to the node that contains the Fibre Channel port.
On the Node Details page, under the rear view of the node, hover over the Fibre Channel port to display details about the port including the port speed. You can also select Fibre Channel Port to display port information for all configured ports in the Component Details tile.

You can determine the Fibre Channel port speed with the service assistant GUI.

To view the Fibre Channel port speed in the service assistant GUI, complete these steps:

Point your web browser to serviceaddress/service for the node that you want to work on.
Log on to the service assistant using the superuser password.
Select the Port tab under Node Details to view the speed of the Fibre Channel port.

If the node is in a system that is operational, you can determine the Fibre Channel port speed using the CLI commands.

To view the Fibre Channel port speed of a system, issue the following command:

svcinfo lsportfc 0

The following output is an example of what you might see. The Fibre Channel port speed is shown in bold.

id 0
fc_io_port_id 1
port_id 1
type fc
port_speed 16Gb
node_id 1
node_name node1
WWPN 500507680C212C72