rmpartnership
Use the rmpartnership command to remove a Metro Mirror or Global Mirror partnership on one system. Because the partnership exists on both systems, it is necessary to run this command on both systems to remove both sides of the partnership. If the command is run on only one system, the partnership enters a partially configured state on the other system.
Syntax
Parameters
- remote_cluster_id | remote_cluster_name
- (Required) Specifies the system ID or the name of the remote system.
Description
This command deletes one half of a partnership on a system. To remove the entire partnership, you must run the command twice, once on each system.
Attention: Before running the
rmpartnership command, you must remove all relationships and groups that are
defined between the two systems. To display system relationships and groups, run the
lsrcrelationship and lsrcconsistgrp commands. To remove
the relationships and groups that are defined between the two systems, run the
rmrcrelationship and rmrcconsistgrp commands.
An invocation example
rmpartnership cluster1The resulting output:
No feedback