使用 CLI 检查节点或节点容器的状态

您可以使用命令行界面 (CLI) 来检查节点或节点容器的状态。

过程

运行以下某个命令来检查一个节点的详细状态：

lsnode 1
lsnode node1

结果

以下输出是运行此命令后显示的内容。根据您使用命令时所在的系统不同，结果可能会有所不同。

示例

id 1
name node1
UPS_serial_number
WWNN 5005076071000010
status online
IO_group_id 0
IO_group_name io_grp0
partner_node_id 2
partner_node_name node2
config_node yes
UPS_unique_id
port_id 5005076071010010
port_status active
port_speed 4Gb
port_id 5005076071020010
port_status active
port_speed 4Gb
port_id 5005076071030010
port_status active
port_speed 4Gb
port_id 5005076071040010
port_status active
port_speed 4Gb
hardware S01
iscsi_name iqn.1986-03.com.ibm:2145.bm-cluster-curie.node1
iscsi_alias
failover_active no
failover_name node2
failover_iscsi_name iqn.1986-03.com.ibm:2145.bm-cluster-curie.node2
failover_iscsi_alias
panel_name J308E4K
enclosure_id
canister_id
enclosure_serial_number
service_IP_address
service_gateway
service_subnet_mask
service_IP_address_6
service_gateway_6
service_prefix_6
service_IP_mode static
service_IP_mode_6
site_id
site_name
identify_LED
product_mtm 2145-DH8

code_level 8.3.0 (build xxx)
serial_number J308E4K
machine_signature F10C-2E38-5673-6756