The following information modifies the text appearing in the readme for 
the 3740 package.

$4 **********************************************************************
$4 * Support for IBM LTO Ultrium (358x) devices                         *
$4 **********************************************************************
$4
$4 TSM supports the IBM 3580, 3581, 3583 and 3584 LTO Ultrium products on the
$4 AIX, and NT 4.0 platforms.
$4  - The IBM 3580 is a stand-alone drive. 
$4  - The IBM 3581, 3583 and 3584 are automated libraries.
$4
$4 Users must use the SSD RMSS device drivers on these platforms to recognize
$4 and configure the IBM 3580, 3581, 3583 and 3584.  
$4 To obtain the correct level of the device driver, review the README files 
$4 in the ftp.software.ibm.com/storage/devdrvr.
$4
$4 To define the device class, users should use the following:
$4
$4   DEFINE DEVCLASS device_class_name DEVTYPE=LTO
$4                   FORMAT=[DRIVE or ULTRIUM or ULTRIUMC]
$4                   LIBRARY=library_name
$4
$4 On the AIX and NT 4.0 platforms, users should define the IBM 3581, 3583
$4 and 3584 automated libraries as follows:
$4
$4  DEFINE LIBRARY library_name LIBTYPE=SCSI DEVICE=<device_special_file>
$4
$4 On the AIX and NT 4.0 platforms, users should define the drives within
$4 those libraries as follows:
$4
$4  DEFINE DRIVE library_name drive_name DEVICE=<device_special_file>
$4               ELEMENT=<element_number>
$4
$4 Examples:
$4
$4 On AIX, assuming AIX recognized and configured the medium
$4 changer as /dev/smc0 and the drive as /dev/rmt0:
$4
$4  DEFINE LIBRARY 3584LIB LIBTYPE=SCSI DEVICE=/dev/smc0
$4  DEFINE DRIVE 3584lib rmt0 DEVICE=/dev/rmt0 ELEMENT=104
$4
$4 On the NT 4.0, assuming NT recognized and configured the
$4 medium changer as lb3.1.0.2 and the drive as \\.\Tape0:
$4
$4  DEFINE LIBRARY 3584LIB LIBTYPE=SCSI DEVICE=lb3.1.0.2
$4  DEFINE DRIVE 3584lib tape0 DEVICE=\\.\Tape0 ELEMENT=104
$4
$4 ATTENTION: At this time the DSMLABEL utility and the Tape Labeling Wizard do not
$4           support this new family of products.  
$4           Users should use the LABEL LIBVOLUME command.
$4
$4           When inserting cartriges into the entry exit ports of the IBM 3584 
$4           library wait several seconds for the library to scan the barcodes 
$4           before issuing a reply to a server request to insert a cartrige in
$4           an entry exit port. This problem will be fixed in a future level of 
$4           microcode for the IBM 3584 library.
$4